Product Description

BREAKAWAY SYSTEM

RVibrake systemscome with a Breakaway System, however, some people tow more than one vehicle or change towed vehicles and need an additional Breakaway System.

The Breakaway System is the only part of RVibrake’s system that requires some installation. The one time installation can take about 25-45 minutes..

 

The junction box mounts on the front bumper of the towed vehicle and the wiring harness is routed back through the engine compartment and firewall and then plugs into RVibrake’s housing.

The coiled cable is attached to the pin inside of the junction box and the hitch of the motorhome.

If the towed vehicle comes unattached from the motorhome the coiled cable pulls the pin out of the junction box causing RVibrake to push on the brakes of the towed vehicle bringing it to a stop.

Video Player

Media error: Format(s) not supported or source(s) not found

Download File: http://wp-vr-expert.elidevapp1aws.elisys-servers.ca/wp-content/uploads/2022/06/RVi-How-To_-Breakaway-Wireless-Adapter-for-RVibrake3-Installation-and-Pairing.mp4?_=2

00:00

00:00

00:00

Use Up/Down Arrow keys to increase or decrease volume.